This guide explains the steps required to enable Wi-Fi or Bluetooth printing for the Brother QL-1110 NWB printer for iLobby. 

Requirements:

·       Brother QL-1110NWB Printer 
·       Apple iPad or iPad Pro 
·       Badge Rolls DK Series: 
o   Brother QL Series, Continuous roll (DK-2205) 
o   Brother QL Series with Expiry tag (Expiry/VOID) 
·       Administrative access to the iLobby Portal

Parts Description 

Bluetooth Configuration 

Step 1. Enabling Bluetooth on the Printer:

1.     Turn on the printer by connecting the AC Power Cord to the Label Printer. Then, plug the AC Power Cord into a grounded AC power outlet. 

2.     ­­­­­­Hold on the Power Button to turn on the printer. 

3.     Press and hold the Bluetooth button until the Bluetooth LED is lit blue. 

Step 2. Enabling Bluetooth on the iPad:

1.     Open the iPad settings and navigate to the Bluetooth settings . 

2.     Under “My Devices” you should see DIRECT-*****_QL-1110NWB, where ***** is the last five digits of the product serial number. 

3.     Tap on the printer and after a few seconds, it should now say “Connected”, meaning the printer is connected to the iPad and ready to be used with iLobby.

Step 3: Enabling Bluetooth in the iLobby Portal 

1. Navigate to https://portal.goilobby.com/ and login using your iLobby credentials. 

2. Tap  button, then tap Configuration. 

3. Select the appropriate Site for which you would like to have Bluetooth printing enabled. 

4. On the Features tab, enable Badge Printing (if disabled). 

If Badge Printing is already enabled, press .

5. On the pop-out menu, set the Connection Method to Bluetooth. 

6. Tap Save (at the bottom of the screen).