Introduction

The iLobby system will always include a Bosstab iPad stand (Elite Evo). The stand allows your iLobby iPad to stay secure while also being protected from damage.

Freestanding

The Bosstab stand offers a strong yet minimal frame which features internal cable management and a lockable faceplate complete with barrel key. The stand has a no-slip base anchored down with six sturdy rubber feet and can also be screwed into a table for more stability. 

Mounting

The Bosstab stand can be mounted to a surface to prevent it from being moved. This will require M4x0.7 screws, with a recommended length of 16mm or longer (depending on the thickness of the surface).

Please note that the screws are not provided by iLobby, and must be purchased separately.

To mount the stand, please take the following steps:

1. The Bosstab case has small rubber covers for the screw holes. Remove the rubber covers to expose the screw holes:

2. Once the screw holes are exposed, you will be able to place the stand against a surface and drill the M4x0.7 screws into the holes to penetrate into the surface you would like to mount the case onto: